Summary
Fills sinks in a surface raster to remove small imperfections in the data.
Illustration
Usage
This raster analysis portal tool is available when you are signed in to an ArcGIS Enterprise
portal that has an ArcGIS Image Server configured for Raster Analysis . When the tool is invoked, ArcGIS Pro serves as a client and the processing happens in the servers federated with ArcGIS Enterprise. The portal tool accepts layers from your portal as input and creates output in your portal.The input raster layer supports the following: a layer from the portal, a URI or URL to an image service, or the output from the Make Image Server Layer tool. This tool does not support local raster data or layers.
A sink is a cell with an undefined drainage direction; no cells surrounding it are lower. The pour point is the boundary cell with the lowest elevation for the contributing area of a sink. If the sink were filled with water, this is the point where water would pour out.
The z-limit specifies the maximum difference allowed between the depth of a sink and the pour point, and determines which sinks will be filled and which will remain untouched. The z-limit is not the maximum depth to which a sink can be filled.
For example, consider a sink area where the pour point is 210 feet in elevation, and the deepest point within the sink is 204 feet (a difference of 6 feet). If the z-limit is set to 8, this particular sink will be filled. However, if the z-limit is set to 4, this sink will not be filled since the depth of this sink exceeds this difference and would be considered a valid sink.
All sinks that are less than the z-limit, and lower than their lowest adjacent neighbor, will be filled to the height of their pour points.
The number of sinks found with the z-limit will determine the length of processing time. The more sinks there are, the longer the processing time will be.
Syntax
Fill(inputSurfaceRaster, outputName, {zLimit})| Parameter | Explanation | Data Type |
inputSurfaceRaster | The input raster representing a continuous surface. | Raster Layer; Image Service; String |
outputName | The name of the output fill raster service. The default name is based on the tool name and the input layer name. If the layer already exists, you will be prompted to provide another name. | String |
zLimit (Optional) | Maximum elevation difference between a sink and its pour point to be filled. | Double |
Derived Output
| Name | Explanation | Data Type |
| outputRaster | The output raster. | Raster Layer |
Code sample
This example fills the sinks of an input elevation surface raster.
import arcpy
arcpy.Fill_ra("https://myserver/rest/services/elevation/ImageServer","outFill1")This example fills the sinks of an input elevation surface raster.
#---------------------------------------------------------------------------
# Name: Fill_example02.py
# Requirements: ArcGIS Image Server
# Import system modules
import arcpy
# Set local variables
inSurface = "https://myserver/rest/services/elevation/ImageServer"
outputFill = "outFill2"
zLimit = 3.28
# Execute Fill raster analysis tool
arcpy.Fill_ra(inSurface, outputFill, zLimit)Environments
Licensing information
- Basic: Requires ArcGIS Image Server
- Standard: Requires ArcGIS Image Server
- Advanced: Requires ArcGIS Image Server