Rebuild Network Topology (Utility Network)

Summary

Rebuilds the network topology in a specified extent to address errors identified during the validate network topology operation.

This tool is used to rebuild the network topology and repair inconsistencies when you encounter failures that prevent the validate network topology operation from completing. This operation ignores dirty areas and applies to all features in the specified extent. The Rebuild current extent command on the Utility Network tab uses synchronous processing, while this tool uses asynchronous processing.

Note:

The asynchronous rebuild operation uses the UtilityNetworkTools geoprocessing service. The UtilityNetworkTools service is preconfigured in the System folder for feature services that include a utility network. It has a longer time-out setting and is reserved for utility network geoprocessing tasks.

Usage

• The network topology must be enabled.

• When you rebuild a network topology based on a specific extent, the dirty areas that intersect the specified extent are clipped.

  Learn more about network topology

• When working in an enterprise deployment, the following are requirements:

  • The input utility network must be a utility network service from ArcGIS Enterprise 10.9 or later.
  • When working with the Default version, only a single session can run the rebuild operation at a time. While the rebuild operation is running, the network remains accessible for editing and tracing.

  • License:

    The active portal account must be assigned a license with the ArcGIS Advanced Editing user type extension to use this tool in an enterprise deployment.

Parameters

Dialog

Label	Explanation	Data Type
Input Utility Network	The utility network for which the network topology will be rebuilt.	Utility Network; Utility Network Layer
Extent	Specifies the geographical extent that will be used to rebuild the network topology. Current Display Extent —The extent will be based on the active map or scene. This option is only available when there is an active map. Draw Extent —The extent will be based on a rectangle drawn on the map or scene. This option will create a feature class in the project geodatabase and add a layer to the map. The feature class will have the same coordinate system as the map. Note: This option is not available in the Environments dialog box. It is only available from a tool parameter with an extent data type or from the Environments tab on a tool dialog box. Note: When the Enable and disable editing from the Edit tab editing option is checked, you must enable editing on the Edit ribbon tab to draw the extent. Extent of a Layer —The extent will be based on an active map layer. Use the drop-down list to choose an available layer or use the Extent of data in all layers option to get the combined extent of all active map layers, excluding the basemap. This option is only available when there is an active map with layers. Each map layer has the following options: All Features —The extent of all features in the layer. Selected Features —The extent of the selected features in the layer. Visible Features —The extent of visible features in the layer. Note: The extents from the Selected Features and Visible Features options are only available for feature layers. Browse —The extent will be based on an existing dataset. Intersection of Inputs —The extent will be based on the minimum or intersecting extent of all inputs. If no inputs overlap, a null extent with all zeros will result. Union of Inputs —The extent will be based on the maximum or combined extent of all inputs. Clipboard —The extent can be copied to and from the clipboard. Copy Extent —Copies the extent coordinates and coordinate system to the clipboard. Paste Extent —Pastes the extent coordinates and, optionally, the coordinate system from the clipboard. If the clipboard values do not include a coordinate system, the extent will use the map’s coordinate system. Note: The extent coordinates are copied to and pasted from the clipboard using the same formatting and order as the ArcPy Extent object: x-min, y-min, x-max, y-max, and the spatial reference. Reset Extent —The extent will be reset to the default value. Manually entered coordinates—The coordinates must be numeric values and in the active map's coordinate system. Caution: The map may use different display units than the entered coordinates. The use of a cardinal direction (N, S, E, W) is not supported. Use a negative value sign for south and west coordinates.	Extent

Derived Output

Label	Explanation	Data Type
Rebuilt Utility Network	The rebuilt utility network.	Utility Network

Python

arcpy.un.RebuildNetworkTopology(in_utility_network, extent)

Name	Explanation	Data Type
in_utility_network	The utility network for which the network topology will be rebuilt.	Utility Network; Utility Network Layer
extent	Specifies the geographical extent that will be used to rebuild the network topology. MAXOF—The maximum extent of all inputs will be used. MINOF—The minimum area common to all inputs will be used. DISPLAY—The extent is equal to the visible display. Layer name—The extent of the specified layer will be used. Extent object—The extent of the specified object will be used. Space delimited string of coordinates—The extent of the specified string will be used. Coordinates are expressed in the order of x-min, y-min, x-max, y-max.	Extent

Derived Output

Name	Explanation	Data Type
out_utility_network	The rebuilt utility network.	Utility Network

Code sample

RebuildNetworkTopology example (Python window)

Rebuild a specified extent of the network topology for a utility network named GridNetwork.

import arcpy
arcpy.un.RebuildNetworkTopology("GridNetwork", "1952602 294196 1953546 296176")

Environments

This tool does not use any geoprocessing environments.

Licensing information

• Basic: No
• Standard: Yes
• Advanced: Yes