Generate Elevation Bands (Topographic Production)

Synthèse

Creates an elevation bands feature class from a digital elevation model (DEM).

Utilisation

  • The Area of Interest parameter must have only one selected feature in the map sheet extent.

  • The Hydro Exclusion Features parameter is used to identify large bodies of water and coastal areas that would significantly alter the area of the elevation bands.

  • Elevation bands are created with their limits aligned to the Contour Interval parameter value, except low and high values, which will represent their actual calculated values.

  • If more than one input raster is used, all input rasters must have the same cell size, band count, and pixel type. All input rasters should also use the same elevation units (meters or feet).

Paramètres

ÉtiquetteExplicationType de données
Input Raster

The rasters that will be used to create elevation bands.

Raster Layer; Mosaic Layer
Area of Interest

The layer that will define the processing extent.

Feature Layer
Output Feature Class

The feature class containing the output elevation band features.

Feature Class
Contour Interval

Specifies the contour interval that will be used to determine the closest available contour when calculating the elevation band area.

  • 10A contour interval of 10 will be used.
  • 20A contour interval of 20 will be used. This is the default.
  • 40A contour interval of 40 will be used.
  • 80A contour interval of 80 will be used.
Long
Minimum Feature Area

The minimum area of the output polygons. Features smaller than this value will be removed. The default is 0.00016 square decimal degrees.

Remarque :

If you're creating an output dataset with a projected coordinate system, ensure that this value reflects the square units of that coordinate system—for example, square meters for a UTM dataset. Otherwise, the default value may result in an empty output dataset.

Double
Smoothing Tolerance

The tolerance that will be used by the smoothing algorithm. The larger the value, the more generalized the output band features. The default is 0.002 decimal degrees.

Linear Unit
Hydro Exclusion Features
(Facultatif)

The bodies of water that will be excluded when calculating the elevation band area.

Feature Layer
Number of Elevation Bands
(Facultatif)

Specifies the number of elevation bands that will be generated.

  • 1One elevation band will be generated.
  • 2Two elevation bands will be generated.
  • 3Three elevation bands will be generated.
  • 4Four elevation bands will be generated.
Long

arcpy.topographic.GenerateElevationBands(in_raster, in_aoi, out_feature_class, contour_interval, min_area, smooth_tolerance, {in_hydro_features}, {number_of_bands})
NomExplicationType de données
in_raster
[in_raster,...]

The rasters that will be used to create elevation bands.

Raster Layer; Mosaic Layer
in_aoi

The layer that will define the processing extent.

Feature Layer
out_feature_class

The feature class containing the output elevation band features.

Feature Class
contour_interval

Specifies the contour interval that will be used to determine the closest available contour when calculating the elevation band area.

  • 10A contour interval of 10 will be used.
  • 20A contour interval of 20 will be used. This is the default.
  • 40A contour interval of 40 will be used.
  • 80A contour interval of 80 will be used.
Long
min_area

The minimum area of the output polygons. Features smaller than this value will be removed. The default is 0.00016 square decimal degrees.

Remarque :

If you're creating an output dataset with a projected coordinate system, ensure that this value reflects the square units of that coordinate system—for example, square meters for a UTM dataset. Otherwise, the default value may result in an empty output dataset.

Double
smooth_tolerance

The tolerance that will be used by the smoothing algorithm. The larger the value, the more generalized the output band features. The default is 0.002 decimal degrees.

Linear Unit
in_hydro_features
(Facultatif)

The bodies of water that will be excluded when calculating the elevation band area.

Feature Layer
number_of_bands
(Facultatif)

Specifies the number of elevation bands that will be generated.

  • 1One elevation band will be generated.
  • 2Two elevation bands will be generated.
  • 3Three elevation bands will be generated.
  • 4Four elevation bands will be generated.
Long

Exemple de code

GenerateElevationBands example (stand-alone script)

The following code sample creates a raster layer from Production Mapping sample data. The script runs the GenerateElevationBands function using the raster layer and writes the output to a file geodatabase at C:\Temp. You need to have the Extension ArcGIS Spatial Analyst and the Production Mapping extension enabled.

# Name: GenerateElevationBands_sample.py
# Description: Use the Generate Elevation Bands tool to create a new output feature class with elevation bands for cartography

# Import System Modules
import arcpy

# Check Out Extensions
arcpy.CheckOutExtension('Foundation')
arcpy.CheckOutExtension('Spatial')

# Setting Local Variables
in_raster = r'C:\Temp\Monterey.dt2'
in_aoi = r'C:\Temp\MapIndex.gdb\Index_Polygons'
output_features = r'C:\Temp\Test.gdb\Output_Elevation_Bands'
contour_interval = 20
minimum_area = '0.00016'
tolerance = '0.02 DecimalDegrees'
in_hydro_exclusion = r'C:\Temp\Test.gdb\Hydro_Polygons'
number_of_bands = 3

# Creating feature layer and selecting an index feature
query = "PRODUCT_ID = 'V795X16573'"
aoi_layer = arcpy.management.MakeFeatureLayer(in_aoi, 'AOI').getOutput(0)
arcpy.management.SelectLayerByAttribute(aoi_layer, 'NEW_SELECTION', query)

# Creating feature layer and setting definition query for tidal water features
exclusion_layer = arcpy.management.MakeFeatureLayer(in_hydro_exclusion, 'HYDRO', "TYPE = 'Tidal Water'").getOutput(0)

# Calling Generate Elevation Bands tool
arcpy.topographic.GenerateElevationBands(in_raster, aoi_layer, output_features, contour_interval, minimum_area, tolerance,
                                        exclusion_layer, number_of_bands)
# Check In Extensions
arcpy.CheckInExtension('Foundation')
arcpy.CheckInExtension('Spatial')

Environnements

Cet outil n’utilise pas d’environnement de géotraitement.

Informations de licence

  • Basic: Non
  • Standard: Non
  • Advanced: Nécessite Production Mapping and Spatial Analyst

Rubriques connexes