Append Routes (Location Referencing)

Available with Location Referencing license.

Summary

Appends routes from an input polyline into an LRS Network.

Note:

When the target layer is a feature service layer, the validation results for this tool are written to the ArcGIS Server directory. This file is automatically cleaned up in 10 minutes by default, which may not be enough time to process all of the validations and write them to the workstation running ArcGIS Pro. For larger data loads, it is recommended that you adjust the maximum file age to at least one hour.

Learn more about adjusting this server directory setting in Manager

Usage

• An LRS dataset is required to run this tool. To create an LRS dataset, add the calibration point, centerline, and redline layers to a feature dataset; then run the Modify LRS tool with the geodatabase as the input.

• This tool will create centerlines in the target LRS dataset as well as routes in the target LRS Network.

• The output routes will have x-, y-, and z-values from the input polyline vertices, but no m-values will be appended.

• Create any new fields that will be used for field mapping in the underlying LRS Network feature class before appending routes.

• The spatial reference, x,y resolution, and x,y tolerance of the input polyline feature class and the target LRS Network must match.

• A text log is written locally that states that the tool has been run and contains information about routes that failed validation. The tool messages provide the location of the text log, which is in the temporary directory.

• The output of this tool is a modified LRS Network that has had routes appended and centerline features created.

• This tool supports conflict prevention and will attempt to acquire and transfer locks.

• When conflict prevention is enabled, the following are supported:

  • If the routes to be appended are new, no locks will be acquired for those routes.
  • For other load types, such as RETIRE_BY_ROUTE_ID and REPLACE_BY_ROUTE_ID, locks will be automatically acquired, if available.
  • If the locks cannot be acquired, the tool will not run and will provide the text file of the offending locks.
  • If working in the default version, the locks acquired will be released automatically when the tool finishes running successfully.
  • If working in a child version, the acquired locks will remain in ON POST status after the tool completes. Post or delete the version to release the locks.
  • If working in a child version and the running of the tool is canceled by interruption, the locks will be acquired and remain with the releasable status as Yes. The lock owner can release the lock.

    Learn more about releasing locks in ArcGIS Pipeline Referencing or releasing locks in ArcGIS Roads and Highways.

  Learn more about conflict prevention in Pipeline Referencing or conflict prevention in Roads and Highways.

• If the target LRS Network is configured as a line network with support for a multifield route ID, the following parameters are not required for appending routes:

  • Route Name Field
  • Line Name Field

• The tool checks for a utility network that is configured with the LRS Network to which the routes are being loaded, and if such a utility network is found, considers existing centerlines when appending in routes. If the centerline that you append to a route to does not have a CenterlineID value, one will be created and a centerline sequence record will be added. If a CenterlineID value exists where you append a route, the existing centerline sequence record will be updated with the appended route's RouteID value.

  The following preprocessing conditions will result in a logged error that must be resolved before the tool can be run to completion:

  • Loading the route feature requires a centerline split.
  • The x,y and z geometries of centerlines and routes do not match.
  • A centerline is a partial match (for example, if part of the centerline is outside the x- ,y-, and z-tolerance).
  • An appended route has one or more whole centerlines that match the geometry, but there are locations where no centerlines exist.
  • Overlapping centerlines are detected (the utility network doesn’t allow overlapping centerlines).
  • There are no centerlines that match an appended route.

  Learn more about managing Pipeline Referencing and a utility network together

• This tool will fail if the Load Type parameter is set to Replace by route ID or Retire by route ID and the source route does not have the same RouteName and RouteID values as the target route.

• If the Replace by route ID option is selected, any routes that are replaced will have the route and centerline sequence records replaced. Calibration Points on the route will be deleted and need to be recreated or reloaded.

Parameters

Dialog

Label	Explanation	Data Type
Source Routes	The input from which the routes will be derived. The input can be a polyline feature class, shapefile, feature service, or LRS Network feature class.	Feature Layer
LRS Network	The target LRS Network into which the routes will be loaded.	Feature Layer
Route ID Field	The field in the input polyline feature class that will be mapped to the LRS Network route ID. The field type must match the RouteID field type of the target LRS Network and must be either a string or GUID field type. If it is a text field, the field length must be shorter than or equal to the length of the target RouteID field.	Field
Route Name Field	The field in the input polyline feature class that will be mapped as the LRS Network route name. The field must be a string field, and the field length must be shorter than or equal to the length of the target route name field.	Field
From Date Field (Optional)	A date field in the input polyline feature class that will be mapped as the From Date Field value in the LRS Network. If the field is not mapped, a null value representing the beginning of time will be provided for all appended routes.	Field
To Date Field (Optional)	A date field in the input polyline feature class that will be mapped as the To Date Field value in the LRS Network. If the field is not mapped, a null value representing the end of time will be provided for all appended routes.	Field
Line ID Field (Optional)	The field in the input polyline feature class that will be mapped as the LRS Network line ID. This parameter is only used if the target LRS Network is an LRS line network. The field type and length must match the RouteID field type and length of the centerline sequence table.	Field
Line Name Field (Optional)	The string field in the input polyline feature class that will be mapped as the LRS Network line name. This parameter is only used if the target LRS Network is an LRS line network.	Field
Line Order Field (Optional)	The long integer field in the input polyline feature class that will be mapped as the LRS Network line order. This parameter is only used if the target LRS Network is an LRS line network. Learn more about line networks and line order in Pipeline Referencing or line networks and line order in Roads and Highways.	Field
Field Map (Optional)	Controls how attribute information in the source route fields will be transferred to the input LRS Network. Fields cannot be added to or removed from the target LRS Network because the data of the source routes is appended to an existing LRS Network that has a predefined schema. While you can set merge rules for each output field, the tool will ignore those rules.	Field Mappings
Load Type (Optional)	Specifies how appended routes with measure or temporality overlaps with identical route IDs as Target Network records will be loaded into the network feature class. Add—The appended routes will be loaded into the target LRS Network. If any route ID in the source routes already exists in the target LRS Network with the same temporality, it will be written to the output log as a duplicate route and must be corrected or filtered out before completing the loading process. This is the default. Retire by route ID—The appended routes will be loaded into the target LRS Network and any routes in the target LRS Network that have the same route ID and temporality overlap as the appended routes will be retired. If the appended route eclipses a target route with the same route ID, the target route will be deleted. Replace by route ID—The appended routes will be loaded into the target LRS Network and any routes in the target LRS Network with the same route ID as the appended routes will be deleted.	String

Derived Output

Label	Explanation	Data Type
LRS Network	The updated LRS Network feature layer.	Feature Layer
Output Results File	The text file that details changes made by the tool.	Text File

Python

arcpy.locref.AppendRoutes(source_routes, in_lrs_network, route_id_field, route_name_field, {from_date_field}, {to_date_field}, {line_id_field}, {line_name_field}, {line_order_field}, {field_map}, {load_type})

Name	Explanation	Data Type
source_routes	The input from which the routes will be derived. The input can be a polyline feature class, shapefile, feature service, or LRS Network feature class.	Feature Layer
in_lrs_network	The target LRS Network into which the routes will be loaded.	Feature Layer
route_id_field	The field in the input polyline feature class that will be mapped to the LRS Network route ID. The field type must match the RouteID field type of the target LRS Network and must be either a string or GUID field type. If it is a text field, the field length must be shorter than or equal to the length of the target RouteID field.	Field
route_name_field	The field in the input polyline feature class that will be mapped as the LRS Network route name. The field must be a string field, and the field length must be shorter than or equal to the length of the target route name field.	Field
from_date_field (Optional)	A date field in the input polyline feature class that will be mapped as the From Date Field value in the LRS Network. If the field is not mapped, a null value representing the beginning of time will be provided for all appended routes.	Field
to_date_field (Optional)	A date field in the input polyline feature class that will be mapped as the To Date Field value in the LRS Network. If the field is not mapped, a null value representing the end of time will be provided for all appended routes.	Field
line_id_field (Optional)	The field in the input polyline feature class that will be mapped as the LRS Network line ID. This parameter is only used if the target LRS Network is an LRS line network. The field type and length must match the RouteID field type and length of the centerline sequence table.	Field
line_name_field (Optional)	The string field in the input polyline feature class that will be mapped as the LRS Network line name. This parameter is only used if the target LRS Network is an LRS line network.	Field
line_order_field (Optional)	The long integer field in the input polyline feature class that will be mapped as the LRS Network line order. This parameter is only used if the target LRS Network is an LRS line network. Learn more about line networks and line order in Pipeline Referencing or line networks and line order in Roads and Highways.	Field
field_map (Optional)	Controls how attribute information in the source route fields will be transferred to the input LRS Network. Fields cannot be added to or removed from the target LRS Network because the data of the source routes is appended to an existing LRS Network that has a predefined schema (field definitions). While you can set merge rules for each output field, the tool will ignore those rules. The ArcPy FieldMappings class can be used to define this parameter.	Field Mappings
load_type (Optional)	Specifies how appended routes with measure or temporality overlaps with identical route IDs as Target Network records will be loaded into the network feature class. ADD—The appended routes will be loaded into the target LRS Network. If any route ID in the source routes already exists in the target LRS Network with the same temporality, it will be written to the output log as a duplicate route and must be corrected or filtered out before completing the loading process. This is the default. RETIRE_BY_ROUTE_ID—The appended routes will be loaded into the target LRS Network and any routes in the target LRS Network that have the same route ID and temporality overlap as the appended routes will be retired. If the appended route eclipses a target route with the same route ID, the target route will be deleted. REPLACE_BY_ROUTE_ID—The appended routes will be loaded into the target LRS Network and any routes in the target LRS Network with the same route ID as the appended routes will be deleted.	String

Derived Output

Name	Explanation	Data Type
out_lrs_network	The updated LRS Network feature layer.	Feature Layer
out_details_file	The text file that details changes made by the tool.	Text File

Code sample

AppendRoutes example 1 (Python window)

The following demonstrates how to use the AppendRoutes function in the Python window to append routes into an existing LRS Network, replacing those routes where an overlap occurs.

# Name: AppendRoutes_ex1.py
# Description: Append routes into an existing LRS Network, replacing those routes where an overlap occurs.
# Requires: ArcGIS Location Referencing

# Set tool variables
source_routes = r"C:\Data\UPDM.gdb\LRS\EngineeringNetwork"
in_lrs_network = r"C:\Data\NY_Data.gdb\LRS\P_Integrity\P_EngineeringNetwork"
route_id_field = "RouteId"
route_name_field = "RouteName"
from_date_field = "FromDate"
to_date_field = "ToDate"
line_id_field = "LineId"
line_name_field = "LineName"
line_order_field = "LineOrder"
field_map = None
load_type = "REPLACE_BY_ROUTE_ID"

# Execute the tool
arcpy.locref.AppendRoutes(source_routes, in_lrs_network, route_id_field, route_name_field, from_date_field, to_date_field, line_id_field, line_name_field, line_order_field, field_map, load_type)

AppendRoutes example 2 (stand-alone script)

The following demonstrates how to use the AppendRoutes function as a stand-alone Python script.

# Name: AppendRoutes_ex2.py
# Description: Append records into an existing network feature class without performing any attribute field mapping.
# Requires: ArcGIS Location Referencing

# Import arcpy module
import arcpy

# Check out license
arcpy.CheckOutExtension("LocationReferencing")

# Local variables:
SourceRoutes = r"C:\Data\UPDM.gdb\LRS\EngineeringNetwork"
TargetNetwork = r"C:\Data\NY_Data.gdb\LRS\P_Integrity\P_EngineeringNetwork"
Route_ID = "RouteId"
Route_Name = "RouteName"
From_Date = "FromDate"
To_Date = "ToDate"
Line_ID = "LineId"
Line_Name = "LineName"
Line_Order = "LineOrder"

# Process: Append Routes
arcpy.locref.AppendRoutes(SourceRoutes, TargetNetwork, Route_ID, Route_Name, From_Date, To_Date, Line_ID, Line_Name, Line_Order, None, "ADD")

# Check in license
arcpy.CheckInExtension('LocationReferencing')

AppendRoutes example 3 (stand-alone script)

The following demonstrates how to use the AppendRoutes function as a stand-alone Python script for a user-generated route ID network.

# Name: AppendRoutes_ex3.py
# Description: Append records into an existing usergenerated routeId network feature class in a stand-alone script.
# Source fields : RS and RN, Target fields : RouteSystem and RouteNumber
# Requires: ArcGIS Location Referencing 

# Import arcpy module
import arcpy

# Check out license
arcpy.CheckOutExtension("LocationReferencing")

# Local variables:
SourceRoutes = r"C:\Data\DOT.gdb\LRS\RoutestoAppend"
TargetNetwork = r"C:\Data\DOT.gdb\LRS\StateRoutes"
RouteId = "RouteId"
RouteName = ""
FromDate = "FromDate"
ToDate = "ToDate"
LineId = ""
LineName = ""
LineOrder = ""
loadtype = "ADD"

# Define field mappings object
fieldMappings = arcpy.FieldMappings()  

# Add input fields
fldmap1 = arcpy.FieldMap()
fldmap1.addInputField(SourceRoutes, "RS")

fldmap2 = arcpy.FieldMap()
fldmap2.addInputField(SourceRoutes, "RN")

# Set output fields
fld1 = fldmap1.outputField  
fld1.name = "RouteSystem"
fld1.aliasName = "RouteSystem"
fldmap1.outputField = fld1

fld2 = fldmap2.outputField  
fld2.name = "RouteNumber"
fld2.aliasName = "RouteNumber"
fldmap2.outputField = fld2

# Add output fields to field mappings object
fieldMappings.addFieldMap(fldmap1)
fieldMappings.addFieldMap(fldmap2)

# Execute: Append Routes
arcpy.locref.AppendRoutes(SourceRoutes, TargetNetwork, RouteId, RouteName, FromDate, ToDate, LineId, LineName, LineOrder, fieldMappings, loadtype)

# Check in license
arcpy.CheckInExtension('LocationReferencing')

AppendRoutes example 4 (stand-alone script)

The following demonstrates how to use the AppendRoutes function as a stand-alone Python script in a feature service.

# Name: AppendRoutes_Pro_Ex4.py
# Description: Append routes using a feature service in a standa-alone script. It is recommended to work in a version and post it into the default version.
# Requires: ArcGIS Location Referencing

# Import arcpy module.
import arcpy

# Check out any necessary licenses.
arcpy.CheckOutExtension("LocationReferencing")

# Set tool variables.
sourceroute = r"C:\LocationReferencing\LR.gdb\LRS\routes"
route_name_field = "ROUTENAME"
from_date_field = "FROMDATE"
to_date_field = "TODATE"
line_id_field = "LINEID"
line_name_field = "LINENAME"
line_order_field = "ORDERID"
field_mapping = r'CREATIONUSER "Creation User" true true false 50 Text 0 0,First,#,C:\LocationReferencing\LR.gdb\LRS\routes,CREATIONUSER,0,50;DATECREATED "Date Created" true true false 8 Date 0 0,First,#,C:\LocationReferencing\LR.gdb\LRS\routes,DATECREATED,-1,-1;DATEMODIFIED "Date Modified" true true false 8 Date 0 0,First,#,C:\LocationReferencing\LR.gdb\LRS\routes,DATEMODIFIED,-1,-1;LASTUSER "Last User" true true false 50 Text 0 0,First,#,C:\LocationReferencing\LR.gdb\LRS\routes,LASTUSER,0,50;EVENTSOURCE "Event Source" true true false 50 Text 0 0,First,#,C:\LocationReferencing\LR.gdb\LRS\routes,EVENTSOURCE,0,50;LEGACYID "Legacy ID" true true false 38 Text 0 0,First,#,C:\LocationReferencing\LR.gdb\LRS\routes,LEGACYID,0,38;ENGFROMM "ENGFROMM" true true false 0 Double 0 0,First,#,C:\LocationReferencing\LR.gdb\LRS\routes,ENGFROMM,-1,-1;ENGTOM "ENGTOM" true true false 0 Double 0 0,First,#,C:\LocationReferencing\LR.gdb\LRS\routes,ENGTOM,-1,-1;OBJECTSTATUS "Object Status" true true false 20 Text 0 0,First,#,C:\LocationReferencing\LR.gdb\LRS\routes,OBJECTSTATUS,0,20;CONTINFROMM "Continuous from Measure" true true false 0 Double 0 0,First,#,C:\LocationReferencing\LR.gdb\LRS\routes,CONTINFROMM,-1,-1;CONTINTOM "Continuous to Measure" true true false 0 Double 0 0,First,#,C:\LocationReferencing\LR.gdb\LRS\routes,CONTINTOM,-1,-1'
load_type = "REPLACE_BY_ROUTE_ID"

## Target Route  is in feature service. Signing in portal is required to access the feature service.
arcpy.SignInToPortal('https://yourdomain.com/portal', 'username', 'password')

## Map the target route network from the feature service.Here, 18 corresponds to the target route network.
targetroute_network = r"https://yourdomain.com/server/rest/services/FeatureServiceName/FeatureServer/18"

# Process: Append Routes.
arcpy.locref.AppendRoutes(sourceroute, targetroute_network, route_id_field, route_name_field, from_date_field, to_date_field, line_id_field, line_name_field, line_order_field, field_mapping, load_type)

# Check in licenses
arcpy.CheckInExtension('LocationReferencing')

Environments

Current Workspace

Licensing information

• Basic: Requires ArcGIS Location Referencing
• Standard: Requires ArcGIS Location Referencing
• Advanced: Requires ArcGIS Location Referencing